ITRADINGBOT

EMA20 over five pairs: educational multi-pair transfer card

Demonstrate how one entry hypothesis is transferred to a list of pairs: the close of a normal 1h candle crossing EMA20 upward, tested on each listed pair separately. All selected numbers and the pair list itself are illustrative; nothing here has been tested and a longer list is not a better one.

EDUCATIONAL EXAMPLE - NOT EXECUTED

Open in backtester

Settings

Exchange	BINANCE Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Asset	BTCUSDT Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Balance Operation Mode	No Withdrawal Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Direction	Long Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Mode	Averaging using limit orders Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Start of calculation	01.08.2026 12:00 Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Calculation End	31.08.2026 12:00 Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it

Money Management

Deposit	1000 USDT Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
First Order	100 USDT Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Commission limit order	0.02 % Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Market Order Commission	0.05 % Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Margin type	Isolated Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Leverage	1 Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it

Risk Management

Take Profit	0.75 % Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Stop Limit	0.5 % Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
SOS	1 % Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
DSOS	1 Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Number of SO	0 Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Martingale	1 Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Deviation	-1 % Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it

Entry 1

Moving average

Asset	BTCUSDT Note Derived from the main backtest symbol, which is the first listed pair. In a multi-pair run the calculation service replaces it with the pair being calculated.	read from the documentation
TF	1h Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Candlestick type	Normal Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Calculation	At bar close Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Reverse?	No Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Type	EMA Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it
Period	20 Note Illustrative value, not a recommendation or optimization result.	placeholder, replace it

In the reviewed logic, close[1] < EMA[1] and close[0] >= EMA[0] produces LONG. Reverse is off. The Asset of a condition is the pair being calculated: the calculation service rewrites it to each listed pair in turn, so this one card is applied to every pair independently. This example has no filters or signal exits.

Filters

No conditions configured.

Exit

No conditions configured.

Pairs

Pairs in this test	5
Main pair	BTCUSDT
List	BTCUSDT, ETHUSDT, SOLUSDT, BNBUSDT, XRPUSDT

Each pair is calculated separately on the full deposit; the pairs do not interact and this is not a portfolio. Calculating more than one pair is a VIP feature; without VIP the calculation service refuses the run. Testing more pairs produces more results, not better ones.

Test profile

Signal averaging	No Note Explicit profile annotation, not a literal imported control. Multi-pair test: the pair list is transferred, timezone intent does not establish server date interpretation.	read from the documentation
Hedge	No Note Explicit profile annotation, not a literal imported control. Multi-pair test: the pair list is transferred, timezone intent does not establish server date interpretation.	placeholder, replace it
Fast calculation	No Note Explicit profile annotation, not a literal imported control. Multi-pair test: the pair list is transferred, timezone intent does not establish server date interpretation.	placeholder, replace it
Multitest: pair list	Yes Note Derived from the card's pair list: this annotation is true exactly when a symbols list is present. Calculating more than one pair is a VIP feature.	read from the documentation
Optimizer	No Note Explicit profile annotation, not a literal imported control. Multi-pair test: the pair list is transferred, timezone intent does not establish server date interpretation.	placeholder, replace it
Break-even stop	No Note Explicit profile annotation. False means the two optional BE fields are absent.	placeholder, replace it
Intended timezone	UTC Note Explicit profile annotation, not a literal imported control. Multi-pair test: the pair list is transferred, timezone intent does not establish server date interpretation.	placeholder, replace it

These annotations state intent. Check modes and date interpretation in the application.

Before running a calculation

Check availability of every listed pair and its current instrument and order-size limits in the panel. A pair the form's exchange list does not contain is not ticked and nothing reports it.
Confirm date timezone interpretation, period boundaries and history availability including warm-up for each pair.
The 0.02%/0.05% fees are illustrative; replace them with the actual account conditions.
Calculating several pairs requires VIP; without it the calculation service refuses the run with 400 'Too many symbols'. The tier is not observed by this package.
Each pair is calculated separately on the full deposit. The summed profit on the result page is not one account's result.
No backtest has been executed. Inspect actual results separately; exact deployed-engine parity is not confirmed.
Calculating several pairs is a VIP feature. Without VIP the calculation service refuses the run. The link cannot see your tier.
Check that the pair table shows exactly the pairs listed here. A pair the exchange does not offer is skipped silently, and an earlier selection is not cleared.
Accelerated calculation (x200) is not restored by the link. A VIP account may switch it on by itself, so turn it off by hand before calculating.
Check in the ordinary backtester that classic hedge is switched off: no hedge settings are carried by the link.
Use the ordinary form. Neither optimizer ranges nor an optimizer run are carried by the link.
Check both dates, how the timezone is read and whether there is history for the period, warm-up included. The dates carry no timezone offset.
When the page has loaded, compare every field and every indicator with this card. Changing the exchange, the mode or the pair can clear or rewrite them, and the leverage can be capped.
Opening the application may ask you to sign in. The link carries no session and no credentials, and it starts nothing by itself.
Before starting a calculation, check your actual capital, order size, fees, leverage and the limits of the instrument.